制氮機系統的結構組成主要包含哪些呢？

    在很多場所需要使用高純度的氮氣，而想要制造高純度的氮氣則需要使用評價好的制氮機系統。然而制氮機系統之所以能夠制作高純度的氮氣與其設備的結構密不可分，那么制氮機系統的結構組成主要包含哪些呢？小編在下文簡要闡述。

High purity nitrogen is needed in many places, and a well evaluated nitrogen generator system is needed to produce high purity nitrogen. However, the reason why the nitrogen generator system can produce high-purity nitrogen is closely related to the structure of the equipment. What are the main components of the nitrogen generator system? The following is a brief description of the small edition.

一、壓縮空氣凈化組件

1、 Compressed air purification unit

壓縮空氣凈化組件是制氮機系統的重要組成部分，其提供的壓縮空氣首先需要進入到壓縮空氣凈化組件當中，然后由管道過濾除去大部分的油塵和水之后，再經過冷凍干燥機進一步的除水，精過濾器除油、除塵，并由在緊隨其后的超精過濾器進行深度凈化。

The compressed air purification module is an important part of the nitrogen generator system. The compressed air provided by the compressed air first needs to enter the compressed air purification component, and then most of the oil dust and water are removed by pipeline filtration, and then the water is further removed by the freeze dryer, and the oil and dust are removed by the fine filter, and the deep purification is carried out by the ultra fine filter which is closely followed.

二、空氣儲罐

2、 Air storage tank

在值得相信的制氮機系統當中空氣儲罐也是極為重要的一種組成部件，請能夠降低氣流脈動也能夠起到良好的緩沖作用，與此同時也可以減少量機系統的壓力波動，從而使壓縮空氣能夠平穩地通過凈化組件，以便能夠充分的推出當中的油水和雜質，從而減輕后續氧氮分離裝置的負荷，保證設備可靠穩定的運行。

In the trustworthy nitrogen generator system, the air storage tank is also a very important component. Please reduce the air flow pulsation and play a good buffer role. At the same time, it can also reduce the pressure fluctuation of the measuring machine system, so that the compressed air can pass through the purification components smoothly, so as to fully push out the oil, water and impurities in it, so as to reduce the follow-up oxygen The load of nitrogen separation unit ensures the reliable and stable operation of the equipment.

三、氧氮分離裝置

3、 Oxygen and nitrogen separation unit

氮氧分離裝置裝有碳分子衰，當潔凈的壓縮空氣進入之后，通過分子衰的再生能力和吸附能力完成氧氮分離，從而連續的輸出氮氣，所以對于評價好的制氮機系統來說，氮氧分離裝置也是必不可少的組成。

The nitrogen and oxygen separation device is equipped with carbon molecular decay. When clean compressed air enters, oxygen and nitrogen separation is completed through the regeneration and adsorption capacity of molecular decay, so as to continuously output nitrogen. Therefore, for a well evaluated nitrogen generator system, nitrogen oxygen separation device is also an indispensable component.

四、氮氣緩沖罐

4、 Nitrogen buffer tank

在值得相信的制氮機系統當中，氮氣緩沖罐的運用也必不可少，這是一種用來均衡氧氣壓力和純度的設備，能夠保證氮氣的連續穩固輸入，也能夠對傳承起到保護作用，所以在制氮機系統當中各種設備也是一些重要的一種。

In the trustworthy nitrogen generator system, the use of nitrogen buffer tank is also essential. It is a kind of equipment used to balance the pressure and purity of oxygen, which can ensure the continuous and stable input of nitrogen, and can also play a protective role in the inheritance. Therefore, various kinds of equipment in the nitrogen generator system are also some important ones.

綜上所述制氮機系統主要是由壓縮空氣凈化組件空氣儲罐、氮氧分離裝置以及氮氣緩沖罐等各種組件組合而成，正是由于這些設備的協調工作才能夠使制氮機系統發揮其應有的作用，從而能夠保證所制造而出的氮氣純度更高。

To sum up, the nitrogen generator system is mainly composed of compressed air purification components, air storage tank, nitrogen oxygen separation device, nitrogen buffer tank and other components. It is because of the coordinated work of these equipment that the nitrogen generator system can play its due role, so as to ensure that the nitrogen purity produced is higher.